Current position > News detail
『2 Water Flow Meter: Commercial 2-Inch Stainless Steel Options』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
2 Water Flow Meter: Commercial 2-Inch Stainless Steel Options
Quick Answer: A 2-inch (DN50) stainless steel water flow meter handles flows from 0.5 to 40 m³/h with pressure loss below 0.1 bar. Silver Instruments supplies magnetic and vortex options, both built with 304 or 316L stainless bodies, 4-20 mA outputs, and IP67 protection. Most water applications run best with a magnetic meter, but the final choice depends on conductivity, temperature, and pipe schedule.
Why Stainless Steel for a 2-Inch Water Meter
In commercial water networks, the meter body sees constant moisture, pipe vibration, and occasional chemical cleaning. A stainless steel sensor eliminates rust and keeps the internal bore smooth for years. We use 304 stainless for standard potable water, cooling water, and irrigation lines. When the water carries chlorides above 200 mg/L, we switch to 316L to avoid pitting. A desalination plant in Oman bought twelve 2-inch 316L magmeters from us in 2024. Their old carbon steel meters were flaking rust into the permeate line after 14 months. The stainless upgrade solved that immediately.
Magnetic vs. Vortex: Choosing the Right 2-Inch Meter
For clean water and wastewater, 80 percent of our customers choose a magnetic flow meter. It demands no moving parts, no strainer, and works with water conductivity as low as 20 µS/cm. Our model SIM-2000F with a 2-inch 316L flow tube and PTFE liner measures down to 0.3 m/s. Accuracy stays within ±0.5% of reading, and the local LCD shows both instant flow and daily total in m³. Output is 4-20 mA with HART, ready for any PLC or SCADA.
Vortex flow meters, like our SIV-300 in all-welded 304 stainless, fit where the water is non-conductive or where the customer already standardizes on vortex across steam, gas, and liquid lines. A 2-inch vortex meter needs about 0.5 m/s minimum flow and 15 diameters straight pipe upstream. It costs less than a magmeter in some cases, but you lose the low-flow capability. A brewery client in Vietnam measures filtered water at 8 °C with the 2-inch SIM-2000F because they needed < 0.2 percent repeatability across batch runs. The vortex unit could not hold that at low velocities.
Key Specs to Send a Supplier for a 2-Inch Stainless Meter
Most engineers skip straight to price without sharing the process conditions. That slows down quoting. We need four numbers to give an accurate 2-inch stainless meter proposal:
Water temperature in °C. Standard meters work to 60 °C. High-temperature water above 80 °C needs a different liner or electrode design. Conductivity in µS/cm. For magnetic meters, anything above 20 µS/cm is safe. Below that, we suggest a capacitive magmeter or a vortex meter. Pipe schedule and flange standard. A 2-inch Schedule 40 pipe with ANSI 150 flanges is common. In the Middle East, we often see DIN PN16 or JIS 10K. Max and min flow rate. We size the meter for 1 to 10 m/s normally. Metering below 0.3 m/s on a magmeter hurts accuracy.
Send these values to [email protected] with the subject line "2-inch stainless water meter request." We return a datasheet and price within 2 business hours.
Real Installations: Cooling Towers, Brewing, and Desalination
Here is the thing: a 2-inch stainless meter is the most copied size in commercial water metering. We have seen it on cooling to
Another case: a shrimp hatchery in Ecuador uses our 2-inch SIV-300 vortex meter on a saltwater line with 35,000 µS/cm conductivity. They picked vortex because the meter also logs temperature via the built-in PT100, and they wanted a single device for flow and thermal data. The all-304 body holds up without coating, even in humid coastal air.
Pricing and Delivery for a 2-Inch Stainless Water Meter
Price depends on body material, liner, and flange rating. A 2-inch magmeter in 304 stainless with PTFE liner and standard 4-20 mA starts at around USD 1,200 ex-works. Moving to 316L body and adding HART and Modbus brings it closer to USD 1,550. A vortex meter in all 304 stainless costs about USD 980 for basic pulse output. Most 2-inch models ship within 7 working days, factory calibrated with a NIST-traceable rig. We also provide a 24-month warranty and local service support via our distributors in Dubai, Jakarta, and Lima.
For a binding quotation, tell us your water temperature, conductivity, pipe size (DN), flange standard, and max flow rate. You can reach our application engineers at [email protected] or call +86-135-1213-1526. WhatsApp is also fast: 86-135-12131526. We reply in under 2 hours during Asia business time.
FAQ: 2-Inch Stainless Steel Water Flow Meters
Can a 2-inch magnetic meter measure RO permeate or demin water?
Standard magmeters need about 20 µS/cm minimum. RO permeate often falls below 5 µS/cm. For that, we offer a capacitive magmeter with the same 2-inch stainless body, or a vortex meter. Tell us your lowest expected conductivity before you order.
What is the maximum working pressure of a 2-inch stainless meter?
Our standard magnetic and vortex meters handle PN40 (580 psi) at 20 °C. Higher pressure flanges up to PN100 or ANSI 600 are available on request. Always specify the pressure class when you ask for a quote.
Do I need straight pipe runs for a 2-inch magmeter?
For magnetic flow meters, 5 diameters upstream and 2 diameters downstream is enough. Vortex meters need 15 diameters upstream to form a stable vortex street. If your pipe has bends or valves directly before the meter, choose a magmeter.
Can a stainless steel water meter handle hot water at 90 °C?
Yes, with the right liner. Our standard magmeter uses PTFE and works to 120 °C briefly. For continuous 90 °C service, we specify a PTFE liner and high-temperature electrodes. Confirm your maximum temperature with us before purchase.
What maintenance does a stainless steel magmeter need after installation?
None, in most cases. No moving parts sit in the flow. We recommend checking the flange bolts once a year and wiping the display. If your water carries heavy solids, flush the line every 6 months. We have meters in wastewater plants in Vietnam that have run 5 years with zero intervention.