Digital liquid flowmeter| Zunyi ultrasonic flowmeter manufacturer

『Digital liquid flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

Why use ultrasonic flowmeter? Ultrasonic flowmeter is a non-contact flowmeter that calculates flow rate by measuring the propagation speed and reflection of ultrasonic waves in the fluid. Compared to conventional mechanical flow meters, ultrasonic flow meters have the following advantages: 1. Non contact measurement: Ultrasonic flow meters do not need to come into contact with fluids, so they will not have any impact on fluids, nor will they be corroded or contaminated by fluids. 2. High precision: Ultrasonic flow meters have high measurement accuracy, which can reach 0.5% to 1%. At the same time, it has a wide measurement range and can detect and measure various fluids, including liquids, gases, and vapors. 3. No moving parts: Ultrasonic flow meters have no moving parts, so they do not require maintenance or upkeep, and will not affect measurement accuracy due to wear and tear. 4. Easy to install and use: The installation and use of ultrasonic flow meters are very simple, just install and clean the sensor on the pipeline. At the same time, its operation is also very simple, just follow the instructions to operate
5. Real time monitoring: Ultrasonic flow meters can monitor the flow rate changes of fluids in real time, detect flow abnormalities in a timely manner, and ensure the stability and safety of the production process. In summary, ultrasonic flowmeters have the advantages of high precision, no moving parts, easy installation and use, and have therefore been widely used in industrial production, environmental monitoring, water conservancy and hydropower fields.

2. Performance characteristics of Bitoba flowmeter

◆ Energy saving: Due to the fact that the intelligent probe of the primary measur

ing element is made of Φ 20mm stainless steel, its cross-sectional area is very small and there is almost no pressure loss in the medium pipeline, which greatly reduces the operating cost. Compared with throttling devices such as orifice plates, it has a significant energy-saving effect.

. It is the 061 energy-saving product recommended by the National Development and Reform Commission. ◆ High temperature and high pressure resistance: The intelligent probe of the primary component is made of 1Cr18Ni9Ti stainless steel (special steel is selected according to different media), which can withstand a maximum temperature of 650 ℃ and a maximum pressure of 32MPa for the media. ◆ High reliability: Due to the simple construction and reasonable structural design of the probe, the medium inside the pressure tube does not flow and debris is not easy to enter, so it can maintain measurement accuracy for a long time. ◆ Easy installation: Simply drill a suitable hole in the pipeline and insert the primary component probe into the center of the pipeline for easy installation. ◆ Maintenance free: The primary measuring element probe itself does not require maintenance, only the zero and full calibration of the differential pressure transmitter according to the regular calibration requirements of the measuring instrument, as well as the calibration of the corresponding current input of the secondary meter. Wide measurement range: Accurate measurement is possible for flow rates ranging from 0.2 t/h to 50000 t/h. The measurement effect is particularly good for low flow rate, small flow rate, and large pipe diameter. Widely used for measuring gas, steam, and liquid flow rates. Gas: primary wind speed (quantity), secondary wind speed (quan

Digital liquid flowmeter

2. Performance characteristics of Bitoba flowmeter

『SILVER Official Website SERVICE』