『clamp on type flow meter|thermal flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
May I ask which one has the manual for the 2600 clamp meter? I dont need the English one, I want the Chinese one ..
Instructions for using a clamp ammeter, clamp ammeter usage, and clamp ammeter usage methods. Release time: [2008-12-30] Number of visitors: [12] Related categories: [Common problems] Clamp ammeter usage instructions, clamp ammeter usage, and clamp ammeter usage methods.
1. Before using a clamp ammeter, carefully read the instruction manual to determine whether it is an AC or AC/DC dual-purpose clamp ammeter.
2、 The voltage of the tested circuit cannot exceed the value indicated on the clamp meter, otherwise it may cause grounding accidents or electric shock hazards.
3、 The clamp meter can only measure the current of one phase of the wire at a time, and the measured wire should be placed in the center of the clamp window. It is not allowed to clamp multiple phase wires into the window for measurement.
4、 Before measuring with a clamp meter, it is necessary to estimate the magnitude of the measured current before deciding which range to use. If it is impossible to estimate, you can first use the maximum range gear and then switch to a smaller one to obtain accurate readings. Cannot use low current range to measure high current. To prevent damage to the clamp type watch.
5、 The jaws of the clamp type meter should be tightly closed during measurement. If there is any noise after closure, the jaws can be opened and reset once. If the noise still cannot be eliminated, the joint surfaces on the magnetic circuit should be checked for smoothness. If there is dust, they should be wiped clean and tidy.
6、 Due to the low accuracy of the clamp ammeter itself, the
7、 Do not operate with electricity during maintenance to prevent electric shock
2....Kit - Includes Multimeter and Clamp Meter 15901492495
Fluke 116/323 HVAC Combo Kit Includes a digital multimeter and a clamp gauge, suitable for the HVAC field, providing a safe, accurate, and ergonomic measurement solution. The core function of the Fluke 116 digital multimeter is the built-in thermometer, which integrates the Fluke 80BK-A temperature probe and does not require an additional thermometer. It can directly measure temperature and is suitable for HVAC system debugging. Microampere level current measurement: supports current measurement as low as 0.1 microampere, accurately detects flame sensor signals, and ensures safe operation of the combustion system. Anti misreading technology: Low input impedance (AutoV/LoZ): effectively eliminates "ghost voltage" interference and avoids erroneous readings caused by virtual voltage. True RMS technology: Accurately measure nonlinear signals (such as variable frequency drive outputs) to ensure data reliability. Multi parameter measurement: supports resistance, continuity, frequency, and capacitance measurements to meet the comprehensive diagnostic needs of HVAC systems. Data recording function: Provides Min/Max/Average readings and time recording, tracks signal fluctuation
Hot Blog
Related AD
