Current position > Contact Us
Quick Answer: Water flow meter systems for heavy-duty municipal consumption and infrastructure monitors need stable metering, local totalization, and remote output. Silver Instruments supplies electromagnetic and ultrasonic flow meters with 4-20 mA HART, pulse, and Modbus RTU for water utilities and EPC contractors. Send us your pressure in bar, temperature in °C, pipe size in DN, and flow range for a direct factory price.
Municipal water systems run 24 hours a day. A failed meter on a DN600 main creates billing errors and supply doubt. We have seen this on customer sites in Latin America and Southeast Asia where low-grade liners failed within two years.
Heavy-duty municipal consumption monitoring requires meters that tolerate pressure spikes, low conductivity water, and years of continuous use. Municipal buyers also need local totalizers for billing and remote outputs for SCADA or telemetry.
Silver Automation Instruments builds water flow meter systems with stainless steel and carbon steel spools, PTFE or hard rubber liners, and compact or remote transmitters. We supply the meter, gaskets, grounding rings, and calibration certificate as one package.
Electromagnetic flow meters are the standard for municipal water. They need water conductivity above 5 µS/cm. Most treated drinking water and raw water meet this level. They have no moving parts, so pressure loss is low.
For billing and district metered areas, we supply DN50 to DN1200 electromagnetic flow meters with IP68 remote sensors. The transmitter supports 4-20 mA HART, pulse, and RS485 Modbus. A utility in Vietnam ordered 12 units for DN200 district metered areas last year. The project required battery backup and IP68 enclosures.
For wastewater and sludge lines, we recommend ceramic or PTFE liners. Insert electromagnetic meters work well on DN600 and larger pipes where full-bore meters cost too much. If sludge viscosity is above 100 cP, a full-bore meter with a PTFE liner is safer.
Ultrasonic flow meters suit large water mains and locations where cutting the pipe is expensive. Clamp-on models can be installed without shutdown. Inline spool-piece ultrasonic meters provide higher accuracy for billing. They handle clean water, raw water, and some wastewater lines.
For a contractor in the UAE, we supplied inline ultrasonic flow meters on DN400 potable water mains. The installation used PT100 temperature sensors for heat quantity trending. Accuracy was 0.5 percent of reading.
Heavy-duty municipal systems need more than a display. A water flow meter system should report flow rate, total flow, and alarms to a central station. Silver Instruments transmitters support 4-20 mA HART, pulse output for totalizer, and Modbus RTU. These outputs work with common SCADA platforms used by water utilities.
We also supply paperless recorders and pressure transmitters. These devices build a complete monitoring panel. The recorder stores flow, pressure, and temperature data with trend curves. A user can export historical records for water balance reports.
The right quote needs a few field details. We ask for pipe size, pipe material, water type, pressure, temperature, and flow range. Without these, pricing is guesswork.
Most engineers skip this part, but line size and liner material decide the price. We can quote from a simple sizing chart if needed.
Common parameters from municipal projects are DN80 to DN1200 for distribution mains and DN15 for chemical dosing or sample lines. Pressure ranges from 4 bar to 25 bar depending on pump station. Temperature ranges from 5 °C to 50 °C for water and 5 °C to 80 °C for hot wash or sludge.
Flow range can be 2 kg/h for small dosing pumps or thousands of cubic meters per hour for main trunk lines. For electromagnetic models, conductivity above 5 µS/cm is needed. For hazardous areas with biogas or solvent vapors, we can quote ATEX Zone 1 versions.
We ship to Southeast Asia, Oceania, Latin America, Africa, and the Middle East. Our customers are water utilities, EPC contractors, and panel builders with 10 to 100 staff. We know that municipal budgets require clear lead times and spare parts support.
A water authority in the Philippines uses our electromagnetic meters for non-revenue water monitoring. A Chilean contractor installed heavy-duty flow meters at a desalination plant intake. The seawater application required titanium electrodes and PTFE liners.
Every meter goes through a wet calibration bench before shipping. We log the calibration data. You receive a certificate with the equipment. If the meter is damaged on-site, we send service notes and replacement parts without long back-and-forth.
Send us your pressure in bar, temperature in °C, pipe size in DN, and flow range. We will reply with a model number, data sheet, and price. Our project engineers can recommend the right liner, electrode, and output for your municipal network.
Contact Silver Automation Instruments. Tel: +86-25-68650347. WhatsApp: +86-25-52155837. WeChat: +86 15365082610. For data sheets, see flow-meter.com.au.
Electromagnetic flow meters are the most common because they handle low pressure loss and wide turndown. Ultrasonic clamp-on meters are used when pipe shutdown is not allowed. For billing applications, we usually recommend inline electromagnetic or inline ultrasonic meters with local totalization.
Yes. We build flow meter systems from DN15 to DN1200. Standard pressure ratings are PN10, PN16, and PN25. We also quote higher pressures for pump discharge lines.
Electromagnetic flow meters have no moving parts. Most units keep stable readings for years if the liner and electrodes stay clean. In practice, most municipal operators ignore calibration until bills drift. We calibrate every meter before delivery. Some utilities do a verification check every two years.
Standard outputs include 4-20 mA HART, pulse, and Modbus RTU. Optional options include Profibus DP and wireless modules. The pulse output supports batching and totalizer panels.
Send us your pipe size, flow range, pressure, temperature, and water type. We will return a full quote with lead time. Use the contact details above or send your site data through our website.
