『Sick Flow Meter: Sourcing German High-Precision Industrial Vapor Systems』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Sick Flow Meter: Sourcing German High-Precision Industrial Vapor Systems
Quick Answer: If you are searching for a Sick flow meter for industrial vapor or gas service, Silver Automation Instruments supplies high precision inline flow meters with faster lead times and direct factory support. We offer vortex, thermal mass, and Coriolis meters for steam, compressed air, and process vapor. Send us your pressure in bar, temperature in °C, pipe size in DN, and flow range in kg/h for a direct quote.
What a Sick Flow Meter Search Tells Us
Buyers in Southeast Asia, the Middle East, and Latin America often search for a Sick flow meter because they trust German factory sensors. Sick is a known German brand in industrial automation. But inline vapor measurement is different from a small gas sensor inside a machine. You need a flow meter that handles real pipe conditions. That means pressure shocks, wet steam, high temperature, and long pipe runs.
We have seen this on customer sites many times. A plant engineer in Vietnam needed to measure saturated steam at 8 bar and 175 °C in a DN80 pipe. He asked for a Sick flow meter first. The actual need was a meter with temperature and pressure compensation, 4-20 mA HART output, and a local display. Silver Instruments supplied a vortex flow meter with integrated PT100 and a pressure transmitter. Total installed cost was lower than the German brand quote and lead time was 12 days.
German Precision Does Not Have to Mean Long Lead Times
Most engineers skip this part. German high precision is not only about the brand name. It is about sensor stability, calibration, and repeatability under real vapor conditions. Silver Automation Instruments produces flow meters with calibration certificates traceable to national standards. We use stainless steel 304 or 316L bodies, DN15 to DN300, and electronics rated for ATEX Zone 1 where required.
For saturated steam from 1 to 25 bar, a vortex flow meter works well. Accuracy can reach ±1.0 percent of reading for liquids and ±1.5 percent for steam. The meter outputs 4-20 mA HART, pulse, or RS485 Modbus. You can order a local display with totalizer. Most customers in the food and beverage sector use this setup for steam boilers and sterilizers.
Recommended Flow Meter Pairings for Vapor Systems
Use a vortex flow meter first. It has no moving parts. It works in steam, compressed air, and many process vapors. For DN15 to DN300 lines, we supply wafer or flange connections. A DN50 vortex steam flow meter covers roughly 100 to 1000 kg/h depending on pressure. A DN80 model covers 250 to 2500 kg/h. These are app
If the vapor is not steam, consider a thermal mass flow meter. This fits compressed air and gas vapor lines below 10 bar. Thermal mass meters directly read mass flow in kg/h. They are good for dry gas. They are not the first choice for wet steam. In practice, wet steam damages thermal sensors over time.
For high accuracy liquid or high value vapor condensate, a Coriolis mass flow meter is the right tool. It measures mass flow directly. It also gives density and temperature. A customer in Chile ordered a Coriolis meter for condensate return because they wanted 0.2 percent accuracy and no drift over time.
What to Send Us for a Fast Quote
Because we size the meter for your actual process, we need four values. Send us your pressure in bar, temperature in °C, pipe size in DN, and flow range in kg/h. If you have a Sick flow meter data sheet, send that too. We will compare the spec and propose a direct replacement. Our technical team responds within 24 hours.
Contact Silver Automation Instruments:
Tel: +86-135-1213-1526
Whatsapp: 86-135-12131526
WeChat: +86 13512131526
Website: flow-meter.com.au
FAQ: Sick Flow Meter and Industrial Vapor Measurement
Can Silver Instruments replace a Sick flow meter directly?
Yes in most cases. We need the existing pipe size, flange standard, process medium, pressure, temperature, and output signal. We will match the mechanical and electrical connection. Some Sick gas flow meters are insertion type or inline type. We supply both.
What is the best flow meter for saturated steam?
A vortex flow meter with integrated temperature and pressure compensation. It handles wet steam better than thermal mass. Use a steam separator upstream if steam quality is low.
Do you offer ATEX Zone 1 versions?
Yes. We supply ATEX Zone 1 and Zone 2 versions for vortex, thermal mass, and pressure transmitters. Tell us the gas group and temperature class.
What accuracy can I expect on steam?
Typical accuracy is ±1.5 percent of reading for steam with a vortex meter. Coriolis meters reach ±0.2 percent for condensate or high value vapor liquids. Thermal mass meters reach ±1.0 to ±1.5 percent for dry gas.
How long is delivery to Southeast Asia or the Middle East?
Standard delivery is 7 to 15 days for most DN15 to DN100 models. Larger DN150 to DN300 meters may take 3 to 4 weeks. We ship by DHL, FedEx, or sea freight depending on weight and destination.
Hot News
Related AD
