Current position > Contact Us
Quick Answer: If you are looking for a hydraulic cylinder seal kit manufacturer in China, CORASEALS is an industrial sealing supplier and exporter. We help OEM buyers, distributors, and repair shops select seal kits based on rod diameter, bore diameter, groove dimensions, pressure, speed, and hydraulic fluid. Send us your cylinder data for a quotation.
Hydraulic cylinder seal kits are not one universal design. The rod seal, piston seal, wiper, buffer seal, wear ring, and static O-ring must match the cylinder groove system and the seal profile. CORASEALS supports sourcing and custom kitting for hydraulic cylinder seal kits from China for mobile equipment, industrial machinery, and agricultural equipment.
Buyers often search for a hydraulic cylinder seal kit manufacturer in China when they need a repeatable supply of repair kits. CORASEALS works as a sourcing and technical partner for OEM and aftermarket requirements. We help distributors, repair shops, and equipment manufacturers consolidate seal requirements and prepare export orders.
CORASEALS does not claim that a kit is interchangeable until the sealing profile, dimensions, and material are confirmed from the original parts or the cylinder drawing.
The actual kit contents follow the cylinder design and the original seal system. A complete repair kit usually combines dynamic seals, static seals, and guide elements.
Do not assume that a kit with the same bore and rod size will fit every cylinder. Groove width, groove depth, seal profile, and rod surface finish all affect seal performance.
Hydraulic seal kits usually combine different materials in one kit. NBR, FKM, HNBR, polyurethane, and PTFE compounds are common choices. The right material depends on the hydraulic fluid, operating temperature, pressure cycles, and rod speed.
| Material | Common use in hydraulic seal kits | Selection caution |
|---|---|---|
| NBR | Piston seals, rod seals, and static O-rings in mineral oil systems | Confirm temperature range for the specific compound |
| FKM | Seals exposed to high temperature or aggressive fluids | Not always required for standard mineral oil cylinders |
| Polyurethane | Rod seals, wiper seals, and U-cups in high pressure applications | Check high temperature and low temperature limits |
| HNBR | Piston and rod seals in high pressure mineral oil cylinders | Confirm compatibility with the hydraulic fluid |
| PTFE compounds | Buffer seals, wear rings, and low friction sealing elements | Requires correct groove design and surface finish |
EPDM is generally not suitable for mineral oil systems. EPDM may be used only for specific water based fluids or other media where the compound and application are confirmed.
A clear seal kit quotation requires cylinder dimensions and operating data. The list below covers the minimum details for a reliable selection.
Tell us if the system uses mineral oil, water glycol, phosphate ester, or biodegradable fluid. Fluid type changes the material choice.
If you only have a model code such as TC, UN, UHS, HBY, or KDAS, we still need the cross section dimensions, material, and groove drawing. Seal type codes are not fully standardized across catalogs.
Many hydraulic cylinders use non standard groove dimensions or mixed seal profiles. CORASEALS can supply custom seal kits based on customer drawings, old seal samples, or measured cylinder dimensions. A custom kit may combine a polyurethane rod seal, an NBR piston seal, PTFE backup rings, and wear rings in one package.
Custom kits help repair shops and service teams reduce ordering time. One kit SKU can cover the full cylinder rebuild if the sealing profiles and dimensions are confirmed.
Common applications include hydraulic cylinder seal kits for excavators, loaders, agricultural machinery, forklifts, hydraulic presses, lifting platforms, and industrial cylinders. The sealing requirements change with pressure, rod speed, contamination, and temperature.
Rod seals and wiper seals are critical in construction and mining equipment. Contamination and rod surface damage often cause early failure. The rod surface finish, hardness, and runout must suit the seal profile. A wiper seal alone is not a replacement for proper rod surface finish and low runout.
What information do you need to quote a hydraulic cylinder seal kit?
Send us the rod diameter, bore diameter, groove dimensions, pressure, speed, hydraulic fluid, and seal profile. You can also send the original part number or old seal photos.
Can you match a seal kit from an existing part number?
We can evaluate the part number, but we need dimensions or drawings to confirm. Part numbers and model codes may refer to different seal profiles in different catalogs.
What materials are available for hydraulic seal kits?
Common materials include NBR, FKM, HNBR, polyurethane, and PTFE compounds. We can combine different materials in one kit based on the cylinder positions.
Do you supply non standard or custom hydraulic cylinder seal kits?
Yes. We work from customer drawings, old samples, or measured dimensions. Custom kits can be packed as one SKU for repeat repair orders.
Can you confirm full interchangeability from a model code?
We do not confirm interchangeability from a model code alone. We check the cross section drawing, dimensions, and material before any interchange recommendation. Codes like TC, UN, UHS, HBY, and KDAS require profile verification.
To request a hydraulic cylinder seal kit quotation, send us the rod diameter, bore diameter, groove dimensions, pressure, speed, hydraulic fluid, and seal profile. Add the original part number, old seal photos, and required quantity if available. CORASEALS will review the dimensions and recommend a seal kit for your cylinder type.
